T-Drill  
 
 
   
 
Restrict search only to product names
 

Industrial machines / Tee Forming

S-54
Automatic Collaring Unit for producing single collars for brazed joining of straight and bent tubes. The T-DRILL collaring method is suitable for copper, aluminium, steel, stainless steel, brass and other malleable materials.
- Collar sizes ¼'' - 2⅛''.
- Run tube siz ...


 Information
S-54 - MFT
The Basic S-54 Collaring Unit can be equipped with Manual Feed Table (MFT) for production of headers and manifolds. MFT assures the exact positioning of collars. Tube positioning is being made manually by operator.
- Collar sizes ¼'' - 2⅛''
- Run tube sizes 5/16''- 4⅛''


 Information
S-54 - AFT
S-54 Collaring machine with Automatic Feed Table (AFT) provides a collaring solution for making collars (manifolds, headers) within range 1/4" - 2 1/8" automatically
- Collar sizes ¼'' - 2⅛''
- Run tube sizes ⅜'' - 4⅛''


 Information
S-54 - TCS
The tube collaring system for automatic production of collars in manifolds:
- Uses S-54 collaring unit
- Includes PC-controls providing 2-axis positioning
- Collar sizes ¼'' - 2⅛''
- Run tube sizes 5/16'' - 4⅛''


 Information
T-110
Transportable Collaring Unit for both factory and on-site use to make Butt Welded pipe joints:
- For stainless steel, mild steel, copper/nickel, brass and aluminium alloys
- Collar sizes: ½’’ – 4’’
- Run pipes: 1’’ – 12’ ...


 Information
T-110 & Positioning Table
T-110 Collaring Station can be equipped with manual positioning table. Longitudinal and angle positions can be seen from digital read-outs.


 Information
T-110 Cu
Transportable collaring unit for both factory and on site use. The model T-110 Cu has been designed for collaring of copper and gives a faster work cycle than steel tubing..
- Brazed joint
- Collar sizes ¾’’ - 4⅛
- Run pipes ⅞’’ - 10̵ ...


 Information
TEC-150
Collaring Station for Butt welded joints:
- For stainless steel, steel, copper, aluminium and copper nickel
- Collar sizes: ½’’ – 6’’ IPS
- Run pipe diameters: 1'' - 20'' IPS
- Collaring times: 2.5 - 7 minutes


 Information
TEC-150 Cu
Collaring Station for brazed joints. The model TEC-150 Cu has been designed for collaring of copper and gives a faster work cycle than steel tubing.
- Collar sizes ¾’’ - 6’’ IPS
- Run pipes ⅞’’ - 20'' IPS

 Information
TEC-150 & Manual Positioning Table
Collaring machine with manual positioning system for run-tube. Longitudinal and angle position can be seen from digital read-out.


 Information
TEC-150-8
Tube Collaring system that is capable to pull and trim ½’’ – 8’’ collars. The pilot hole for the largest size is made manually, e.g. with plasma cutter. Pilot holes for collars smaller than 6½’’ are made using the same process as the TEC-150.


 Information
TEC-150-8 & Positioning Table
Collaring machine with manual positioning system for run-tube Longitudinal and angle position can be seen from digital read-out. See also TEC-150 and TEC-150-8.


 Information
 New
TEC-150 HD
Heavy Duty Collaring Station for collars up to 6''with maximum wall thickness up to 0.5" with 6'' collar size.


 Information
 New
TEC-150-8 HD
Heavy Duty Collaring Station for collars up to 8''.

 Information
SEC-100
Automatic Tube Collaring machine for single collars
- Branch sizes ½’’ – 4’’
- Run pipe size up to 8''
- For copper, aluminium, steel and stainless steel tubes


 Information
SEC-100 TBC
Automatic Tube Branching Center for multiple collars:
- The collaring program is selected from the PC controls
- The automatic cycle is started
- Makes all the collars according to the selected program.
- 2-axis positioning


 Information
T-850
Collaring unit for branching of pipes with a big diameter - For stainless steel, mild steel and aluminium alloys - Collar sizes 6'' - 34''- Run pipe sizes 10'' - 56''.

 Information


  © T-Drill Industries Inc. - Powered By Anvia