T-DRILL Industries Inc.
1740 Corporate Drive, #820
Norcross, GA 30093, USA
Tel. (+1) 770-925-0520
Toll free. (+1) 800-554-2730
Fax. (+1) 770-925-3912
 
 
 
Home
Industrial Machines
TEC-150 Operation
Technical Spec's.

TEC-150 Tube Collaring Machine

  


The entire T-DRILL TEC-150 process from pilot hole milling to collar trimming is carried out in a single workstation.

Further advantages have been achieved by incorporating the latest technology. Our TEC-150 is able to provide increased productivity thanks to the improvements made in the tube positioning, handling and collaring operations. Smaller diameter collars of O.D. 21.3-26.9 mm (1/2”-3/4” IPS) are now also achievable depending on run tube diameter and wall thickness.

Benefits:

  • Only one welded joint instead of three as with T-fittings
  • Joint quality - less leakages - better flow -Higher reliability
  • Less waste material
  • Less inventory of fittings
  • No cutting of Run-Tube
  • Remarkable production cost reductions - up to 80%

 

 

More Information:

Video

TEC-150 Brochure

Heavy Industrial Brochure

Capacity Chart

3-step operation

T-DRILL Collaring method for tube branching by butt-welding has 3 steps.

  1. First an elliptical pilot hole is milled. TEC-150 makes the correct size according to parameters being stored to the memory.
  2. Once the pilot hole is ready, the milling unit can be pushed back position and collaring tool will be lifted to the TEC-150. Collaring cycle can be started.
  3. When collar is ready, the top surface of the formed collar needs to be faced to secure proper butt-welding.  

 

Technical Specifications

  • Collaring range: 21.3-168.3 mm 1/2-6" IPS
  • Run tube: 33.7-560 mm (1-16" IPS)
  • Wall Thickness: See Capacity Chart
  • Weight: 1000 kg (2200 lbs.)
  • Height: 1800 mm (71")
  • Width: 1000 mm (40")
  • Depth: 1700 mm (67")

 

 
   
 
 
Home | Contact Us | Site Map © 2006 T-Drill Industries, Inc. All rights reserved.